Oline Contact

Contact me!

Tel: 86-519-68000720


+86 15061960650

Contact Us
  • Tel: 86-519-68000720
  • Fax: 86-519-68856880
  • Mob: 8615061960650 Tracy
  • Add: NO.11 Chuangye East Road, Baizhang Industrial Park, Xinbei District, Changzhou, Jiangsu Province, China.
Home  >  News  >  Artificial turf craft adds luster to the arts

Artificial turf craft adds luster to the arts


  It should be checked before bonding artificial turf back and ground are clean, dry and moisture-free.

  Ambient temperature should be selected at more than 5 ° C construction is appropriate, and should not be in the rainy season or the rainy season construction, otherwise it will lead to bonding time is too long, and even cause non-stick phenomenon.

  Construction process:

  1. Glue: Requires brushing evenly on the surface thickness, can not be repeated glue, or there will be bubbles, or even drop. Apply glue should be applied to the bonding of the two bonding surface.

  2. Adhesion: According to the actual conditions of the temperature, humidity, pressure and other conditions, reasonable control of drying time. Generally 10 to 10 minutes after the glue, the glue reaches 89% dry, non-stick touch is appropriate. When bonding to a one-time alignment sticky, must not be bonded back and forth to be bonded back and forth objects.

  3. Pressurized: After bonding, the surface of the debris clear, with a dedicated rubber hammer to the hammer from the adhesive to both sides of the hammer, so that artificial turf surface full contact with the dense, more solid bond.

  4. Curing: The curing time is usually three days, the final test strength is generally 10 days, so during curing, pay close attention to its maintenance, to avoid over-exposure, flooding and moving in order to achieve the best state of bonding.