Oline Contact

Contact me!

Tel: 86-519-68000720


+86 15061960650

Contact Us
  • Tel: 86-519-68000720
  • Fax: 86-519-68856880
  • Mob: 8615061960650 Tracy
  • Add: NO.11 Chuangye East Road, Baizhang Industrial Park, Xinbei District, Changzhou, Jiangsu Province, China.
Home  >  News  >  How to fill artificial turf with Black Gel

How to fill artificial turf with Black Gel


  After the foundation of artificial turf and turf paving is in place, it is necessary to fill it with quartz sand, but the construction of artificial grass lawn is not perfect, after the completion of quartz sand filling.And fill it with a layer of black glue.How did this work be accomplished?

  The key point is to grasp the thickness of the filling in artificial turf, because the thickness and thickness of the filling are related to the use of the whole artificial turf.If the artificial turf is filled too thick, it will feel too soft, resulting in running and jumping and other action skills can not play out, or even foot injury;But the black colloid is too thin, more likely to cause active foot damage.

  The right thing to do is to check the spread of quartz sand in artificial turfs before filling them with black gels.If you find the phenomenon of inverted seedlings, lack of sand, to repair in time, only after the confirmation of leveling can start to fill the black color colloidal particles.

  Fill the artificial turf with black colloidal particles, starting from one side of the field, from one end to the other.After the whole field was filled out once, the deviation of the cast was changed, and the deviation of the vertical first time was filled for the second time.At the same time of filling, but also with the process of artificial turf stand upright, so that the black colloid evenly filled in its interior.

  In addition to manual filling, there is also a special equipment can be used to fill artificial turfs to scatter black colloid, can achieve good filling effect, thin and even.But whether it is manual or machine operation, it is necessary to put the basalt layer behind 1 cm or so.